상품명 | 던롭 MXR 이펙터파워 DCB10 DC브릭/10구 |
---|---|
브랜드명 | Dunlop MXR |
판매가격 | 186,000원 |
포인트 | 1,860원 (1%) |
수량 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
이펙터 전원 공급장치, 페달파워
아답터, 전원잭 포함.
7개 9V out , 3개 18V out 잭 포함.
The DC Brick is the most reliable and consistent way to power your effects board.
Forget the collection of unsightly wall warts ...
the DC Brick will drive ten pedals or stomp boxes from the same source!
More than a power supply, this box is a power conditioner as well.
Unlike aging batteries, the Brick supplies predictable voltage at all times,
keeping your effects consistent from show to show.
Its FCLC (Foldback Current Limiting Circuit) provides ultimate protection against power shorts and overloads.
Even at full load, you’ll enjoy the quiet and cool operation of a fully regulated power supply.
But since battery-powered effects rarely exceed 30 milliamps each, you’re not likely
to use anywhere near the Brick‘s capacity of 1000 milliamps output!
Power: Included AC power adapter can utilize a wide range of international wall power
from 100 to 240 volts, at 47 to 63 Hz. Supplied with U.S. plug.
Controls: - Power Input from AC Adapter (Use only the included adapter!)
Seven 9V outputs can handle an average of 55 milliamps each, or a total of 375 milliamps in any configuration
Three 18V outputs can handle an average of 208 milliamps each, or a total of 625 milliamps in any configuration
All outputs may be used simultaneously for a total power output of up to 1000 milliamp
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다